Precor AMT 885 Commercial Series Adaptive Motion Trainer
The innovative and premium design of the Adaptive Motion Trainer® (AMT®) 885 takes fitness to a whole new level with the addition of the Open Stride™ feature. This single piece of equipment fully engages exercisers of all fitness levels with an infinite range of stride paths to create a uniquely effective low-impact workout, making every workout a personalized experience. The AMT 885 provides exercisers boundless cardio variety without the need to change machines.
Adaptive Stride Length Naturally adapt stride length without the need to control settings. From zero to 36 inches (0 to 91 cm), to match the desired workout for each unique user.
Open Stride™ Open Stride™ is a unique feature that allows exercisers to adapt their stride height from 6.8 to 10 inches (17 to 25 cm) and stride length from zero to 36 inches (0 to 91 cm).
Dual action provides both upper and lower body workout. Arms are engaged with pushing and pulling motion to provide the ultimate in total body engagement.
Stride Dial™ The pendulum-like swing of the Stride Dial™ helps users see stride length to determine the muscle groups being worked. As stride length changes, the Stride Dial updates real-time.
Biomechanics validated by Western Washington University Biomechanics Lab for users of all fitness levels and sizes, from the 5% size female to the 95% size male user. Excellent stability and freedom of movement.
Foot pedals with toe caps enable user to optimize muscle involvement. Two-step powder-coating process applies rust-resistant undercoat and cosmetic topcoat to steel frame.
Step on platform in the rear is polypropylene for durability. Platform enables the user to step onto the foot pedals while identifying how far the foot pedals may extend from the back of the machine.
Bearings and Pivot Points The smooth feel is optimized by using large bearings and oversized pivot shafts.
Water Bottle and Accessories Holder Accessories holders for water bottle, reading communication devices and portable music player.
Covers Side panels are easy to remove for servicing.
Transport Wheels Integrated
Cable Management Optional
Twenty resistance levels ranging from 20 watts (level 1 at 60 SPM, zero stride length) to 375 watts (level 20 at 120 SPM, max stride length).
Preset Programs Manual Interval Variety Performance Heart Rate Weight Loss
Electronic Readouts Resistance Level Distance Strides / Min Calories / Min Calories Heart Rate Time Remaining Time Elapsed Time in Zone Segment Time Remaining Average Speed (strides per min) Calories / min Calories / hour Watts METS Target HR Average HR Stride Length % Complete Workout Summary Workout Profile
Heart Rate Monitoring
Touch Handheld heart rate sensors located on fixed handlebars for increased accuracy and ease of use by exercisers of all sizes.
Telemetry Yes. Equipped for heart rate telemetry reading using a chest strap.
Chest Strap Transmitter Works with any Polar® compatible 5 KHz chest strap transmitter
Chest Strap Transmitter Included No
No position adjustments necessary - walk in and use.
Auto-adjust contoured shoulder pads. Weight Stack 200 lbs (91 kg).
Simple step-by-step instructions for users of all levels
to help with setup and exercise, including tips to help maximize workouts.
Seat and back pad adjustments feature custom-molded
sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures
stable, low-friction seat adjustments. Ratcheting seat adjustment with
push-to-release lever is color-coded for easy identification. Viewing hold
and etched numbers on sleeve-tube for accurate positioning of seat and back
pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment
with easy-grip pull-pin for smooth adjustment. Pull-pin is color-coded for
easy identification. Slip-resistant rubber grip handle assembly with machine
alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull
grips and handlebars are 1.25 inch (32 mm) diameter.
Weight plates are 1 inch (25 mm) thick, machined cast
weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon
bushings to ensure smooth travel on guide rods. Top weight plate is machined
cast weight plate designed for a 10 lb (5 kg) starting weight (25 lbs / 11 kg
on the Leg Press). Precision, lubricated bushings for smooth operation. The
magnetic weight selection pin assures positive locking to plates and is
secured to weight stack with a thick plastic-coated tether cable. Weight
selection pin is color-coded for easy identification. Guide rods are 3/4 inch
(19 mm) diameter steel, polished with corrosion-resistant plating for smooth
operation and rust prevention. Cables are military spec 5 mm cable (Leg
Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a
4440 lb (200 kg) load. Six machines require no removal of pulleys to route
cable. For the other 7 machines all pulleys are pre-assembled, so removal,
routing and replacing the pulleys is easy - no hunting for the right pulleys,
pulley cover and pulley-mounting hardware. Low starting weight and full
weight range accommodate a wide range of users. Weight stack is easily
accessible from the seated position. Full-length translucent shrouds enclose
the back of the weight stack. Front shroud is full-length with a 3 inch (75
mm) wide slot for access to the weight selection pin. Slotted front shroud
meets ASTM and EN0957 safety standards.
Frame and Finish
11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent
electroweld steel. Finish is electrostatically applied, heat-cured powder
coat for superior durability. Frame available in Experience Titanium
(metallic industry silver).
Fabric is premium-quality industrial vinyl with a protective
coating that results in long-lasting, easy-to-clean upholstery pads and
rollers. Fabric meets or exceeds California fire regulations (Bulletin 117,
section E). Construction features a 4-piece design with a 3/4 inch thick
plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam
core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Glass-fiber-reinforced nylon pulleys with deep V-groove
provide secure cable seating and fluid bearing rotation.
ABEC-rated bearings for added durability and smooth feel.
Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles
with oil-impregnated bronze bushings for precise alignment and frictionless
movement. Pillow block ABEC-grade rotary bearings with grease certs on
machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension,
Leg Curl, Abdominal and Back Extension).
Water Bottle and
Top cap secures the front and back shrouds and includes an
accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Have a question for our team or need assistance placing an order? Give us a call at (516) 605-0800.